Additional Images

Dirt King Fabrication Rear Prefab Bedcage "Raw Steel " for Chevy Silverado / GMC Sierra 1500 DK-632828

DK-632828
The Dirt King Fabrication Prefab Bedcage was developed after building numerous custom bedcages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bedcage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the frame after four brackets are welded on. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bedcage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bedcage is your best choice to increase rear suspension performance while not breaking the bank.

*Handling charge is required for shipping this item*
Was: $1,595.00
Sale: $1,563.10
Save: 2%
Save: $31.90

Qty:

Compatibility

  • 1999-2018 Chevy Silverado 1500 2WD / 4WD
  • 1999-2018 GMC Sierra 1500 2WD / 4WD
  • Will not work on models with factory front torsion bar suspension

    Features

    CAD designed
    Boxed plate and tube construction
    2"x.120" tubing
    1/4", 3/16", and 1/8" plate
    Professionally MIG welded
    Proudly made in the USA

    Includes

    Prefabbed bedcage structure
    Grade 8 mounting hardware
    Installation instructions
    *Shocks and rear Leaf Springs NOT INCLUDED*

    Specs

    Bedcage is RAW STEEL
    Recommend Leaf Pack: Deaver U182 (works with Deaver C85)
    Recommend Shocks: Fox or King (works with all shock manufactures)
    Recommend Shock Length: 16" (26" collapsed, 42" extended)
    - works with 14" shocks with extended rod ends
    Recommended Shock Diameter: 3.0" (works with 2.5"-3.5" shocks)
    Bypass Tube Layout: Bypass tubes on front and back of shocks
    Bedcage Shock Mounting Width: 1.5"
    Axle Width: Requires 1.5"-2" wheel spacers or 1.5"-2" wider per side axle
    Accessory Mounting Hole Size: 1/2"
    **Some welding and fabrication is required for the installation of this bedcage**

    Shipping Information

    • Item Requires Shipping
    • 65.0 lbs.
    • W36.0000” x H6.0000” x L36.0000”
    • $65.00