Additional Images

Dirt King Fabrication Long Travel Race Kit for Chevy Silverado / GMC Sierra 1500 DK-632909

DK-632909
This suspension system was developed for the most extreme off-road terrain. The long travel race kit is capable of 17.5” of travel and can accept up to a 37” tire. Dirt King has perfected the suspension geometry by relocating the upper control arm mounts and modifying the outer pivot locations on the spindle. With these changes they were able to achieve twice the amount of travel compared to stock and eliminate bump steer throughout the suspension cycle. The kit accepts 2.5 x 10” coil overs, 3.0 x 10” bypasses, and 2.0 X 2.0 bump stops (NOT INCLUDED) for superior suspension dampening. This kit is constructed using parts commonly found on trophy trucks such as massive FK 1.5" uniballs and JMX series heims. The result is a suspension system with reliable performance and off road handling that will exceed all expectations.
Was: $5,595.00
Sale: $5,483.10
Save: 2%
Save: $111.90

Qty:
Free Shipping via UPS Ground in the lower Contiguous 48 United States Only

Compatibility

  • 1999-2006 Chevy Silverado 1500 2WD
  • 1999-2006 GMC Sierra 1500 2WD

  • *Will not work on models with factory front torsion bar suspension

    Features

    Utilizes American made FK bearings
    4130 chromoly uniball cups
    ¾” heims for the UCA’s
    Delrin bushings for the LCA’s
    Zinc plated inner bushing sleeves
    Grease fittings for easy servicing
    Pocketed lower shock mounting
    3/16" & 1/8” boxed plate construction
    Internally ribbed with extrusions for weight reduction
    Bump stop plating
    Limit strap tabbing
    Proudly made in the USA

    Kit Includes

    Boxed plate upper control arms
    Boxed plate lower control arms with pocketed shock mounts
    9" quad wrapped limit straps
    Weld on adjustable limit strap mounts
    17-4 stainless steel misalignment spacers
    17-4 stainless steel steering clevis’s
    Fabricated shock towers
    Billet aluminum heimed tie rods
    DOT approved extended brake lines
    Grade 8 mounting hardware
    Durable black powder coat finish
    *Shocks & Bump Stops NOT INCLUDED*

    Specs

  • Wheel Travel: 17.5”
  • Amount of Lift: 0-4”
  • Track Width: 4.25” wider per side
  • Maximum Tire Size: 37”
  • Maximum Backspacing: 4.5”
  • Minimum Rim Size: 17”

  • Items required below, but NOT INCLUDED:

  • Coil Over Shock Size: 2.5 x 10”
  • Bypass Shock Size: 3.0 x 10”
  • Bump Stop Size:2.0 x 2.0
  • Tire Info

    When using 37” tires with this kit modifications to the wheel well will need to be made. The firewall pinch weld will need to be folded over to avoid contact while turning. The upper wheel well will also need to be modified to avoid contact at full bump. Fiberglass Fenders recommended.

    Shipping Information

    • Item Requires Shipping
    • 110.0 lbs.
    • W24.0000” x H24.0000” x L6.0000”
    • Free Shipping via UPS Ground in the lower Contiguous 48 United States Only