NOTE: This shock set up is recommended for vehicles with no lift, or stock height in the rear. The collapsed dimensions are shorter than the 5100 rear shocks. Driver Side 8" Travel: Ext. 21.54" Col. 13.58" Pass. Side 8.5" Travel: Ext. 22.5" Col. 14.06"
"Specific drivers and passenger rear shocks"
The Front Shocks have groves in the body so that you can set them to Stock Height or up to a 2.5" Lift.
Shocks were designed to level out a stock truck.
These are the Bilstein 5100 Series Shocks and they are a direct bolt on application.
These Front shocks are made by Bilstein for "Race Car Dynamics" to there original specifications.
Zinc-plated shocks that install like factory replacement shocks and are designed to correct the factory rake.
The OEM spring seat is repositioned to provide more Pre-Load to the factory spring. The result is a level front to rear ride height.
An extremely simple and effective solution,to level out your truck and improve ride quality.
These Front Shocks "Do Not" come with Dust Boots or any other bushings per Bilstein...
You can re-use the factory bushings if not worn or damaged and the rear shocks DO NOT affect the vehicles ride height.
***NOTE: Rear shocks will NOT CHANGE the vehicles ride height.