Toyota Tacoma 2wd Pre Runner & 4wd RCD/Bilstein 5100 Series with 5125 Series RearsRide Height Adjustable

Bilstein 5100 Series Pre Load Adjustable Front shocks with Bilstein 5125 Series Rear Shocks for a '96-'04 Toyota Tacoma 4x4 & 2wd TRD (Pre-Runner)

*NOTE: These shocks are currently on Back Order until sometime in mid-June of this year.

Shocks are for 6 Lug vehicles Only!!!

Toyota Forum Members please contact us for discounts!!!

Front Shock Part #: BE5-D558-T0
Driver Side Rear 5125 Series Shock Part #: BE5-6252-H0
Passenger Side Rear 5125 Series Shock Part #: BE5-6253-H0

This set of "4" shocks will have the Bilstein 5125 Series 8" and 8.5" Travel Shocks for the "Rear" in it along with the correct 3/4" Urethane Bushings we will put in the shocks for you
at "No Extra" Charge so they will bolt right into the factory location using the
factory hardware....

NOTE: This shock set up is recommended for vehicles with no lift, or stock height in the rear. The collapsed dimensions are shorter than the 5100 rear shocks. Driver Side 8" Travel: Ext. 21.54" Col. 13.58" Pass. Side 8.5" Travel: Ext. 22.5" Col. 14.06"

Features:

"Specific drivers and passenger rear shocks"
The Front Shocks have groves in the body so that you can set them to Stock Height or up to a 2.5" Lift. Shocks were designed to level out a stock truck.
These are the Bilstein 5100 Series Shocks and they are a direct bolt on application.
These Front shocks are made by Bilstein for "Race Car Dynamics" to there original specifications.
Zinc-plated shocks that install like factory replacement shocks and are designed to correct the factory rake.
The OEM spring seat is repositioned to provide more Pre-Load to the factory spring. The result is a level front to rear ride height.
An extremely simple and effective solution,to level out your truck and improve ride quality.
These Front Shocks "Do Not" come with Dust Boots or any other bushings per Bilstein...
You can re-use the factory bushings if not damaged...